|
Pringles Cantenna Parts
- female N connector (use low loss gold, not silver contacts), panel (screw holes) or bulkhead mount (screw nut), with solder pot terminal
- pigtail (cable from antenna to wifi card)
- all-thread, 5 5/8" long, 1/8" OD #10-32
- two nylon lock nuts #10-32
- five 1" fender washers, 1/8" ID
- 6" copper tubing, 1/4" ID
- 1 1/2" piece of 12 gauge solid copper wire
- Pringles can
- bar coaster, 3" across
- In order: Cap nut - Lid - Washer - Pipe - Washer - Pipe - Washer - Pipe with coaster - Washer - Pipe - Washer - Cap nut
- tripod mount (compatible with all standard photo and video tripods) uses a standard ¼ x 20 thread.
|
